TP-Link NC200 - Page 46

NC200
Cloud Camera, 300Mbps Wi-Fi
 Time: Displays the time when the log event occurs. The log can get the correct time after you
configure on the Date/Time page. (go to Advanced → Date/Time
)
 Module: Displays the module to which the log information belongs. You can specify the
module by selecting one from the Module drop-down list at the bottom.
 Level: Displays the severity level of the log information. You can specify the level by selecting
one from the Level drop-down list at the bottom.
 Content: Displays the details of the log information.
 Refresh: Click Refresh to refresh the log information.
 Save Log: Click Save Log and follow the instructions on the browser to save the log as a text
file named log.txt to your specified location.
 Clear Log: Click Clear Log to clear all the log information.
40