9
Chapter 2
Use Your Powerline Adapter
Enjoy your secure powerline network!
2. 4. Add Another Powerline Adapter
I want to:
Add a new powerline adapter into the existing powerline network to extend my network.
For example, I’ve already set up a powerline network using powerline devices, but the
network does not reach everywhere I need it to. I purchased another one to further
extend my network.
How can I do that?
1. Plug the new powerline adapter into a wall outlet near one of the existing powerline
devices.
Same Electrical Circuit
Same Electrical Circuit
2. Press the Pair button on any of the existing powerline devices for 1 second. Its
Powerline LED starts blinking.
3. Within 2 minutes, press the Pair button on the new powerline adapter for 1 second.
Its Powerline LED starts blinking.
Existing
Powerline Device
New
Powerline Device
6
within 2 minutes
Blinking
Green
Blinking Green
Solid Green
4. When the Powerline LED turns solid green, it’s done. Relocate the new powerline
adapter to the place where wired internet access is needed.
To Next Page
Loading...
Need help?
General