TP-Link PHAROS SERIES User Manual

7
1HWZRUNUHTXLUHPHQWV Establish the wireless network coverage in the campus,
community, industrial park or other public places and so on.
7KHGHYLFHLQWKHQHWZRUN The device in AP Router Mode connects to root ADSL/Cable
Modem for internet access. Meanwhile, it creates a wireless network for the wireless
clients to connect to the internet.
Note:
In this mode, the device cannot be managed directly through the port connected to ADSL/Cable
Modem. To manage the device, connect the management host to the device wirelessly or via the
other LAN port.
1.5 5HSHDWHU
The device in Repeater Mode can extend wireless coverage of an existing wireless
network. The SSID and encryption type of the device should be the same as those of the
root AP.
1.6 Bridge
The device in Bridge Mode can extend wireless coverage of an existing wireless network.
The SSID and encryption type of the device can be different from those of the root AP.

TP-Link PHAROS SERIES Specifications

General

Model	PHAROS SERIES
Category	Wireless Access Point
Frequency	5 GHz
Wireless Standards	IEEE 802.11a/n
Operating Temperature	70°C
Management	Web-based
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK, WEP
Interface	10/100M Ethernet
Operating Modes	Access Point, Client, Repeater
Mounting	Pole Mounting