TP-Link RE205 - FAQ; How to reset the extender to its factory default settings?; What should I do if I cant access the web management page?; What should I do if I forget my login password?

44
Chapter 7 Manage Your Extender
1. Click FACTORY RESTORE to reset the extender.
2. Wait a few minutes for the reset and reboot.
Note:
1. During the reset process, do not power off or reset the extender.
2. We strongly recommend you backup the current configuration settings before resetting the extender.
7. 6. Reboot the Extender
You can reboot your extender to clear cache and enhance running performance if
needed.
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Settings > System Tools > Reboot.
• To reboot the extender
Click REBOOT and wait a few minutes.
• To set up reboot schedule
Enable Reboot Schedule and set the corresponding settings.