TP-Link tapo C420 - Mount Your Camera; Step 1. Drill Holes; Step 2. Install the Bracket; Step 3. Mount Camera

8
Mount Your Camera
When you nish adding your camera in the Tapo app, you can place your camera on a at surface, or mount it on a wall or ceiling with the provided
mounting template and screws.
Step 1. Drill Holes
Stick the mounting template to the desired mounting place. Drill 3 screw
holes (ø=6mm) according to the template.
Step 2. Install the Bracket
Insert three anchors into the holes and use the screws to ax the
bracket over the anchors.
Step 3. Mount Camera
Install the camera to the mounting bracket, and adjust the camera angle.
Size of Screws
1.8±0.1
30±0.5
3.5±0.1