TP-Link tapo C420 - Charge the Battery; Method 1; Method 2; Insert the Battery

5
Charge the Battery
Method 1:
Connect the battery to a power source.
Method 2:
Insert the battery into the camera, and then connect the camera to a power
source.
Insert the Battery
1. Twist anti-clockwise and then pull to remove the cover of the
camera. Insert the battery.
2. Align the indicator line on the cover with the arrow icon on the
camera body. Press and rotate clockwise to the lock position to
replace the cover.
Solid amber
Solid green
5V USB Charger
Charging:
Fully charged:
5V USB Charger
RES
SYNC
ET
/
Closed
Open
1
2