TP-Link Tapo T110 - Resetting Your Smart Sensor; Hardware Reset Method; Software Reset via Tapo App

14
How to Reset Your Smart Sensor
Watch videos at https://www.tp-link.com/support/download/tapo-t110/
Option 2. Via the Tapo App
Long press the card on the home page and tap or go to the Device Settings
page and tap the Remove button to remove your sensor from your account.
OR
Option 1. Via Reset Button
Remove the cover, then use a pin to press and hold the Reset button
for 5 seconds until the front LED starts blinking.
5s