TP-Link TD-8616 Quick Installation Guide

Quick Installation Guide
ADSL2+ Modem
MODEL NO. TD-8616
7106504341 REV1.0.0
Package Contents
Resource CD
Ethernet Cable
Power Adapter
TD-8616
QIG
MODEL NO. TD-8616
ADSL2+ Modem
Phone Cable x 2
ADSL Splitter
Hardware connection
（
Power)
(ADSL)
Step 1: Connect your devices step by step following the gure.
Step 2: Power on all your devices and then check the LEDs
(especially the ADSL LED).
Name
Status
Indication
On
The modem is powered on.
On
ADSL line is synchronized and ready
to use.
Flashing
ADSL negotiation is in progress.
(LAN )
On
There is a device conneted to this LAN
port.
Flashing
The modem is sending or receiving data
over this LAN port.
Ethernet Cable
1
2
3
Computer
Phone Cable
PHONE
MODEM
LINE
Splitter
Phone Cable
Wall Socket
Connect to the Internet
( Here we use Windows 7 as an example. )
3
Click Set up a new connection or network.
Click Start -> Control Panel.
2
Click Network and Sharing Center.
Click Connect to the Internet , and then click Next .
4
1

TP-Link TD-8616 Specifications

General

Type	ADSL2+ Modem
Interface	Ethernet
Data Rates Downstream	Up to 24 Mbps
Data Rates Upstream	Up to 1 Mbps
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Power Supply	9V DC, 0.6A
Ports	1 x RJ11, 1 x RJ45
ADSL Standards	ITU-T G.992.1 (G.dmt), ITU-T G.992.3 (ADSL2), ITU-T G.992.5 (ADSL2+)
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C (-40°F to 158°F)