TP-Link TD-8616 Installation Manual

1
Turn off all of your network devices, including your computer and the Modem.
Connect your computer to the
Port labeled “LAN” on the
Modem with an Ethernet cable.
Connect the splitter to the wall
j
ack using a telephone line,
then use the other telephone
line to directly connect it to the
ADSL port on the Modem and
the MODEM port of the
splitter, also have the PHONE
port of the splitter connected
to a telephone.

TP-Link TD-8616 Specifications

General

Type	ADSL2+ Modem
Interface	Ethernet
Data Rates Downstream	Up to 24 Mbps
Data Rates Upstream	Up to 1 Mbps
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Power Supply	9V DC, 0.6A
Ports	1 x RJ11, 1 x RJ45
ADSL Standards	ITU-T G.992.1 (G.dmt), ITU-T G.992.3 (ADSL2), ITU-T G.992.5 (ADSL2+)
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C (-40°F to 158°F)