2
If no telephone is needed, please connect the ADSL port of the Modem to the
wall jack using the telephone line directly.
Turn on all of your network devices, including your computer and the Modem
then check to see if the LEDs of the Modem display normally as the diagram
below describes.
If the LEDs display abnormally, please check to see if all the cable connectors
(power adapter, phone line and Ethernet cable) are well connected to your
device. With the phone line well connected, if the ADSL LED turns off after a
quick-flash, please contact your ISP (Internet Service Provider) to ensure that
your internet connection is active.
Note
Note
Plug the provided Power Adapte
into the Power jack on the back o
the Modem and the other end to a
standard electrical wall socket.
Power: Solid light
LAN: Solid light if the LAN port is
connected
ADSL: Flashing when the modem
is synchronizing; Solid light if the
modem is synchronized
To Next Page
Loading...
Need help?
General
