Need help?Do you have a question about the TP-Link W8951ND and is the answer not in the manual?
General| Wireless Security | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
|---|---|
| Antenna Gain | 5dBi |
| Type | ADSL2+ Modem Router |
| Frequency Band | 2.4GHz |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 5%~90% non-condensing |
| Standards | IEEE 802.3, IEEE 802.3u |
| ADSL Standards | ANSI T1.413, ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite) |
| ADSL2 Standards | ITU G.992.3 (ADSL2) |
| ADSL2+ Standards | ITU G.992.5 (ADSL2+) |
| Wireless Standards | IEEE 802.11b, IEEE 802.11g |
| Frequency | 2.4-2.4835GHz |
| Interface | 4 10/100Mbps RJ45 Ports, 1 RJ11 Port |
| Button | Reset Button, WPS Button |
| Operating Temperature | 0°C~40°C (32°F~104°F) |
| Storage Temperature | -40°C~70°C (-40°F~158°F) |
Steps for physically connecting and powering on the DSL modem for initial use.
Instructions on finding and connecting to the NCF WiFi network using provided credentials.
Guide to diagnose and resolve issues with no ADSL signal reaching the modem.
NCF contact details and how to seek assistance for DSL service and modem operation.
Steps to access the modem's configuration settings via a web browser at 192.168.1.1.
Procedures for resetting the modem to factory defaults and configuring it for Bridge or Routed Mode.
Instructions for configuring advanced modem features like Firewall and user administration.
Information on NCF services, websites, and detailed help resources for members.
To Next Page