16
2) Configure your IE browser
Now, try to log on to the Web-based configuration page again after the above
settings have been configured. If you still cannot access the configuration page,
please restore your Modem Router’s factory default settings and reconfigure your
Modem Router following the instructions of this QIG. Please feel free to contact our
Technical Support if the problem persists.
T4. What can I do if I cannot access the internet?
1) Check to see if all the connectors are connected well, including the telephone
line, Ethernet cables and power adapter.
2) Check to see if you can log on to the web management page of the Modem
Router. If you can, try the following steps. If you cannot, please set your
computer referring to T3 then try to see if you can access the internet. If you
still cannot access the internet, please go to the next step.
Open your IE browser, click
Tools tab and you will see
the following screen.
Click Internet Options
Select Never dial a
connection
Click OK
To Next Page
Loading...
