5
Enter the VPI and VCI
values given by your ISP
Internet Parameters Configuration
This page will then display.
Bridge mode is not recommended because multiple computers are not
ermitted to share Internet access in this mode.
Note
Click Next
Click Next
Click Next
Note
If you did not get the VPI, VCI and WAN Type information, please contact
your ISP for this information.
Choose the WAN Type given by
your ISP.
If PPPoE or PPPoA is selected,
please proceed to A;
If Dynamic IP is selected, please
skip to B;
If Static IP or IPoA is selectedLj
please skip to C;
If Bridge is selected, please skip to
D.
To Next Page
Loading...
