6
A. Configuration for PPPoE or PPPoA
B. Configuration for Dynamic IP
C. Configuration for Static IP or IPoA
D. Configuration for Bridge Mode
This page will then display.
Enter the Username, Password
and Confirm Password
provided by your ISP
Click Next
If you are using the modem on a new DSL line and have not completed
your DSL provider’s online registration, you may be using a generic
username and password. When registration is completed, you will need to
update the username and password if you have created a new one.
Note
This type doesn't need to be configured.
This page will then display.
This type doesn't need to be configured.
fter completing the above configuration, please proceed to Quick Setup
Complete.
Click Next
Enter the Static IP information
provided by your ISP manually
To Next Page
Loading...
