-95-
Figure 3-64 IPsec Policy
The following items are displayed on this screen:
General
You can enable/disable IPsec function for the Router here.
IPsec Policy
Policy Name:
Specify a unique name to the IPsec policy. Up to 28 characters
can be entered.
Mode:
Select the network mode for IPsec policy. Options include:
LAN-to-LAN: Select this option when the client is a
network.
Client-to-LAN: Select this option when the client is a host.
Local Subnet:
Specify IP address range on your local LAN to identify which
PCs on your LAN are covered by this policy. It's formed by IP
address and subnet mask.
To Next Page
Loading...
