-49-
Key： If the AP your Router is going to connect needs password, you need to
fill the key in this blank.
Tips:
The Multi-SSID function will be disabled if WDS is enabled.
3.2.1.4 Wireless Advanced
On this page, you can configure the wireless advanced parameters.
Choose the menu Wireless→Wireless Setting→Wireless Advanced to load the following page.
Figure 3-27 Wireless Advanced
General
WMM: WMM function can guarantee the packets with high- priority messages
being transmitted preferentially. It is strongly recommended enabled.
Short GI:
This function is recommended for it will increase the data capacity by
reducing the guard interval time.
Wireless Advanced
Transmit Power:
Here you can specify the transmit power of Router. You can select High,
Middle or Low which you would like. High is the default setting and is
recommended.
To Next Page
Loading...
