TP-Link TL-ER604W - Page 143

-138-
 L2TP/PPTP Tunnel
Choose the menu VPN→L2TP/PPTP→L2TP/PPTP Tunnel to load the following page. Check the box
of Enable VPN-to-Internet to allow the PPTP clients to access the local enterprise network and the
Internet. Then continue with the following settings for the PPTP Tunnel.
Settings:
L2TP/PPTP: Enable
Protocol: PPTP
Mode: Server
Username: PPTP
Password: abcdefg
Tunnel: Client-to-LAN
IP Pool: PPTP_Dialup_User (you just created)
Click the <Save> button to apply.