-17-
ISP Address:
Optional. Enter the ISP address provided by your ISP. It's null by
default.
Service Name:
Optional. Enter the Service Name provided by your ISP. It's null by
default.
Primary DNS:
Enter the IP address of your ISP’s Primary DNS.
Secondary DNS:
Optional. Enter the IP address of your ISP’s Secondary DNS.
Secondary Connection:
Here allows you to configure the secondary connection. Dynamic IP
and Static IP connection types are provided.
Connection Type:
Select the secondary connection type. Options include Disable,
Dynamic IP and Static IP.
IP Address:
If Static IP is selected, configure the IP address of WAN port. If
Dynamic IP is selected, the obtained IP address of WAN port is
displayed.
Subnet Address:
If Static IP is selected, configure the subnet address of WAN port. If
Dynamic IP is selected, the obtained subnet address of WAN port is
displayed.
Status:
Displays the status of secondary connection.
Upstream Bandwidth:
Specify the bandwidth for transmitting packets on the port.
Downstream Bandwidth:
Specify the bandwidth for receiving packets on the port.
PPPoE Status
Status:
Displays the status of PPPoE connection.
“Disabled” indicates that the PPPoE connection type is not
applied.
“Connecting” indicates that the Router is obtaining the IP
parameters from your ISP.
To Next Page
Loading...
