-21-
L2TP Status
Status:
Displays the status of PPPoE connection.
“Disabled” indicates that the L2TP connection type is not applied.
“Connecting” indicates that the Router is obtaining the IP
parameters from your ISP.
“Connected” indicates that the Router has successfully obtained
the IP parameters from your ISP.
“Disconnected” indicates that the connection has been manually
terminated or the request of the Router has no response from
your ISP. Please ensure that your settings are correct and your
network is connected well. Consult your ISP if this problem
remains.
IP Address:
Displays the IP address assigned by your ISP.
Primary DNS:
Displays the IP address of your ISP’s Primary DNS.
Secondary DNS:
Displays the IP address of your ISP’s Secondary DNS.
5) PPTP
If your ISP (Internet Service Provider) has provided the account information for the PPTP connection,
please choose the PPTP connection type.
To Next Page
Loading...
