TL-PA251 AV200+ Multi-Streaming Powerline Adapter With AC Pass Through
14
4.1.2 Enter Password
Enter the password of the remote Powerline Adapters, and then you can set the network name of these
devices on Privacy configuration homepage. The password can be found on the back of the device.
Select the Powerline Adapter from the list, click the Enter Password button and then the following
screen will display.
Enter your Password (Take note of the password format) and click “OK” after setup.
) Note:
The Powerline Adapter device must be present on the power line (plugged in) in order for the password
to be confirmed and added to the network. If the Powerline Adapter device could not be located, a
warning message will be shown.
To Next Page
Loading...
