TP-Link TL-PA7010KIT User Manual

Router
WAN LAN
1
1000Mbps
1000Mbps
Adapter
TL-PA7010
2
3
Adapter
TL-PA7010
6
4
Pair
1000Mbps
More: To add additional Powerline
adapters and extenders with the default
settings, simply plug them into the wall
sockets on the same electrical circuit.
Wait until the Powerline LED turns on.
Same Electrical Circuit
Same Electrical Circuit
Note: If the LED is red or o, please refer to FAQ-Q2.
Attention
Wall Outlet Power Strip
Plug powerline devices into wall outlets instead of power strips.
Quick Installation Guide
* TL-PA7010 KIT (European version) is used for demonstration in this guide.

TP-Link TL-PA7010KIT Specifications

General

Model	TL-PA7010KIT
Category	Powerline Adapter
Encryption	128-bit AES
Button	Pair button
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Modulation Technology	OFDM
Standards and Protocols	IEEE 802.3, IEEE 802.3u
Ports	Ethernet
Data Rate	Up to 1000 Mbps
Range	300 meters
Power Consumption	Standby: 0.5W
LED Indicator	Power, Ethernet, Powerline
Operating Voltage	100-240V~50/60Hz

Summary

Quick Installation Guide

Basic Setup Procedure

Connect router to one adapter, plug in second adapter, and wait for the Powerline LED to turn on.

Expanding the Network

Add more adapters or extenders by plugging them into wall sockets on the same electrical circuit.

Important Installation Warning

Plug powerline devices into wall outlets, not power strips, for optimal performance and safety.

Set Up a Secure Powerline Network by Pairing

Create a New Secure Network

Press Pair button on one device for 1 second, then on another within 2 minutes to create a secure network.

Join an Existing Secure Network

Press Pair button on an existing device for 1 second, then on a new adapter within 2 minutes to join.

LED and Button Functions

Details on Power LED, Powerline LED, Ethernet LED status and the Pair button functions.

Troubleshooting and Support

Frequently Asked Questions

Answers to common questions regarding adapter reset, LED status, no internet, and relocation.

Advanced Configuration

Instructions for using the tpPLC utility for advanced configuration and accessing support.