9
Chapter 2
Use Your Powerline Adapter
For example, I’ve already set up a powerline network using powerline devices, but the
network does not reach everywhere I need it to. I purchased another one to further
extend my network.
How can I do that?
1. Plug the new powerline adapter into a wall outlet near one of the existing powerline
devices.
Same Electrical Circuit
Same Electrical Circuit
2. Press the Pair button on any of the existing powerline devices for 1 second. Its
Power LED starts blinking.
3. Within 2 minutes, press the Pair button on the new powerline adapter for 1 second.
Its Power LED starts blinking.
6
within 2 minutes
Existing
Powerline Device
New
Powerline Device
Blinking
On
pair
Blinking
pair
4. When the Powerline LED turns on, it’s done. Relocate the new powerline adapter
to the place where wired internet access is needed.
To Next Page
Loading...
