24
¾ User name: Type the user name for the PPPoE service which is provided by the ISP.
¾ Password: Type the password for the PPPoE service which is provided by the ISP.
¾ IP address, Subnet mask, and Gateway (read only): Shows the IP information got from
PPPoE server site.
¾ Status: Shows the Status of PPPoE connection.
6.1.5 Streaming
RTSP is a streaming control protocol, and a starting point for negotiating transports such as RTP,
multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for
controlling the media stream delivered by a media server. RTSP servers typically use RTP as the
protocol for the actual transport of audio/video data.
¾ RTSP Port: Choose the RTSP port. The RTSP protocol allows a connecting client to start a
video stream. Enter the RTSP port number to use. The default value is 554.
¾ RTP Port: Specify the range of transmission port number of video stream. The default range
is 50000 to 50999. The user can specify a number between 1024 and 65535.
6.1.6 UPnP
UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This camera is an UPnP
enabled camera. If your operating system is UPnP enabled, the camera will automatically be
detected and a new icon will be added to “My Network Places.” If you do not want to use the
UPnP functionality, it can be disabled.
To Next Page
Loading...
