33
6.3.2 Date & Time
You can set up the camera or make it synchronized with PC or remote NTP server. Also, you
may select your time zone in order to synchronize time locally.
¾ Server Date & Time: Displays the date and time of the camera.
¾ PC Time: Displays the date and time of the connected PC.
¾ Adjust:
- Synchronize with PC:
Click this option to enable time synchronization with PC time.
- Manual setting:
Click this option to set time and date manually.
- Synchronize with NTP:
Click this option if you want to synchronize the camera’s date and time with those of time
server called NTP server (Network Time Protocol).
¾ NTP Server: Type the host name or IP address or domain name of the NTP server.
¾ NTP Sync. Interval: Select an interval between 1 and 24 hours at which you want to adjust
the camera’s time referring to NTP server
¾ Time zone: Set the time difference from Greenwich Mean Time in the area where the
camera is installed.
¾ Daylight Saving: Disable or enable the daylight saving adjustment.
To Next Page
Loading...
