TP-Link TL-SF1024D - Chapter 2. Features&Specifications

34
Italiano
Figure 1-2 Fasten the Switch in the Rack
2) Please inspect the Power Adapter carefully, and make sure that it is
properly connected to a power source.
3) Power on. It will be automatically initialized and the LED indicators should
respond as follows:
a) All of the Link/Act LED indicators will flash momentarily, which
represent a resetting of the system.
b) The Power LED indicators will light up.
Chapter 2. Features&Specifications
¾ Conformi agli standards IEEE802.3, IEEE802.3u
¾ 16/24/48 Porte RJ45 10/100Mbps Auto-Negotiation che supportano
Auto-MDI/MDIX
¾ Supportano IEEE802.3x flow control per full-duplex mode e backpressure
per half-duplex transfer mode
¾ Indicatori a LED per il monitoraggio di alimentazione, link, actività e
velocità
¾ Contenitore in metallo 19’ rack-mountable
¾ Alimentatore interno