04 Introduction
The front panel of TL-SG1016D is shown as the following figure.
Figure 1-5 Front Panel of TL-SG1016D
10/100/1000Mbps
RJ45 Port
LEDs
The front panel of TL-SG1008 is shown as the following figure.
Figure 1-6 Front Panel of TL-SG1008
Power
123456 7 8
123456 7 8
Link
Act
1000Mbps
TL-SG1008 8-Port Gigabit Switch
10/100/1000Mbps
RJ45 Port
LEDs
LEDs
LED Status Indication
Power
On The switch is powered on.
Off The switch is powered off or power supply is abnormal.
Link/Act
On
There is a device linked to the corresponding port but no
activity.
Flashing The corresponding port is transmitting or receiving data.
Off There is no device linked to the corresponding port.
1000Mbps
On The corresponding port is running at 1000Mbps.
Off
The corresponding port is not running at 1000Mbps or
has no link.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding Link/Act LED and a 1000Mbps LED.
To Next Page
Loading...
