03
16/24-Port Gigabit Easy Smart Switch
Introduction
LEDs
LED Status Indication
PWR
On The switch is powered on.
Off The switch is powered off or power supply is abnormal.
Speed
On
Green The corresponding port is running at 1000Mbps.
Yellow The corresponding port is running at 10/100Mbps.
Flashing
The corresponding port is transmitting or receiving
data.
Off There is no device linked to the corresponding port.
PoE Status
On The port is connecting and supplying power to a PD.
Flashing
The PoE power circuit may be in short, the power
current may be overloaded or non-standard PD is
connected.
Off
No PD is connected to the corresponding port, or no
power is supplied according to the power limits of the
port.
PoE Max
On
The power of all the connected PoE ports is between
103W and 110W. No power may be supplied if additional
PDs are connected.
Flashing The power of all the connected PoE ports is ≥110W.
Off The power of all the connected PoE ports is <103W.
FAN
Green The fan works properly.
Yellow The fan doesn't work properly.
Reset
Press this button for five seconds or above to reset the software setting back to
factory default settings.
10/100/1000Mbps RJ45 Port and PoE Port
TL-SG1016PE switch is equipped with 16 10/100/1000Mbps Auto-Negotiation RJ45
ports and 8 of them support PoE function.
The 16 10/100/1000Mbps RJ45 ports are designed to connect to the device with a
bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding Link/Act
LED.
8 of 10/100/1000Mbps RJ45 ports also support PoE function which integrates
power and data onto one Ethernet cable. The working status can be indicated by the
PoE MAX LED and PoE Status LEDs on the front panel.
To Next Page
Loading...
