To Next PageTo Next Page
Need help?Do you have a question about the TP-Link TL-SG108-M2 and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Quality of Service (QoS) support | Yes |
| Stackable | - |
| Product color | Black |
| Rack mounting | No |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | 2.5G Ethernet (100/1000/2500) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3p, IEEE 802.3u, IEEE 802.3x |
| Jumbo frames | 10000 |
| Forwarding rate | 29.8 Mpps |
| MAC address table | 16000 entries |
| Packet buffer memory | 1.5 MB |
| Power source | DC |
| Input current | 1.5 A |
| Input voltage | 12 V |
| Package depth | 315 mm |
| Package width | 240 mm |
| Package height | 70 mm |
| Package weight | 1350 g |
| Cables included | AC, LAN (RJ-45) |
| Heat dissipation | 53.4 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 131 mm |
|---|---|
| Width | 226 mm |
| Height | 35 mm |
Details the process of installing the TP-Link switch, covering initial setup and connection.
Details the power status indicators and how to manage the switch's power.
Describes the meaning of the LED indicators on the switch's ports for network status.
Troubleshooting steps for when the power LED on the switch is not illuminated.
Essential safety guidelines for operating and maintaining the TP-Link switch.
Instructions on proper handling, environmental conditions, and power supply usage.
