EasyManuals Logo

TP-Link TL-SG2008 Installation Guide

TP-Link TL-SG2008
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Connection
7106504849 REV2.0.0
For more information, please visit our website: http://www.tp-link.com
Installation Guide
8-Port Gigabit Smart Switch
TL-SG2008
Internet
Ethernet Ports (1-8)
Configuration
1. To access the GUI of the switch, open a browser and type the default
management address http://192.168.0.1 in the address field of the
browser, then press the Enter key.
To log in to the switch, the IP address of your PC should be set in the
same subnet as that of the switch. The IP address is 192.168.0.x (”x” is
any number from 2 to 254). Subnet Mask is 255.255.255.0. For details,
please refer to Appendix B in the User Guide on the resource CD.
Note:
2. Enter admin for both the User Name and Password in the lower case
letters. Then click the Login button or press the Enter key.
3. After a successful login, the main page will appear as follows, and you
can click the menu on the left side to configure the corresponding
functions.
For more details about how to configure the switch, see the User Guide
on the resource CD.
Note:
DC Power Cord
PC
PC

Other manuals for TP-Link TL-SG2008

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-SG2008 and is the answer not in the manual?

TP-Link TL-SG2008 Specifications

General IconGeneral
Switch typeManaged
Switch layerL2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
10G supportNo
Number of VLANs512
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresMulticast VLAN, Tagged VLAN, Voice VLAN
Cable types supportedCat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
DHCP featuresDHCP client
Security algorithmsSSH, SSH-2, SSL/TLS
Jumbo frames9216
Forwarding rate11.9 Mpps
MAC address table8000 entries
Packet buffer memory4 MB
CertificationCE, FCC, RoHS
Product colorBlack
Rack mounting-
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)6.42 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Package depth280 mm
Package width223 mm
Package height68 mm
Package weight930 g
Weight and Dimensions IconWeight and Dimensions
Depth126 mm
Width209 mm
Height26 mm

Related product manuals