Configuring Static Routing Example for Static Routing
Configuration Guide
403
* - candidate default
C 10.1.2.0/24 is directly connected, Vlan30
C 10.1.10.0/24 is directly connected, Vlan20
S 10.1.1.0/24 [1/0] via 10.1.10.1, Vlan20

Connectivity Between Switch A and Switch B
Run the ping command on switch A to verify the connectivity:
Switch_A#ping 10.1.2.1
Pinging 10.1.2.1 with 64 bytes of data :
Reply from 10.1.2.1 : bytes=64 time<16ms TTL=64
Reply from 10.1.2.1 : bytes=64 time<16ms TTL=64
Reply from 10.1.2.1 : bytes=64 time<16ms TTL=64
Reply from 10.1.2.1 : bytes=64 time<16ms TTL=64
Ping statistics for 10.1.2.1:
Packets: Sent = 4 , Received = 4 , Lost = 0 (0% loss)
Approximate round trip times in milli-seconds:
Minimum = 1ms , Maximum = 3ms , Average = 1ms
To Next Page
Loading...
