EasyManuals Logo

TP-Link TL-SG3428X User Manual

TP-Link TL-SG3428X
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
JetStream L2/L2+ Managed Switch
07Introduction
LED Indication
Port 4952/SFP
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Yellow On: Running at 100 Mbps, but no activity.
Yellow Flashing: Running at 100 Mbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
Note: Port 4952 for TL-SG3452, SFP for TL-SG3210.
SFP+
Green On: Running at 10 Gbps, but no activity.
Green Flashing: Running at 10 Gbps and transmitting or receiving data.
Yellow On: Running at 1 Gbps, but no activity.
Yellow Flashing: Running at 1 Gbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
Note: For TL-SG3452X
For TL-SG3428
LED Indication
PWR
On: The switch is powered on.
Off: The switch is powered off or power supply is abnormal.
Flashing: Power supply is abnormal.
SYS
Flashing: The switch works properly.
On or Off: The switch works improperly.
Link/Act
On: A device is linked to the port but no activity.
Off: No device is linked to the corresponding port.
Flashing: Transmitting or receiving data.
1000Mbps
On: Running at 1000 Mbps.
Off: Running at 10/100 Mbps or no device is linked to the port.
Port 25–28
On: Running at 1 Gbps, but no activity.
Flashing: Running at 1 Gbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
For TL-SG3428X
LED Indication
PWR
On: The switch is powered on.
Off: The switch is powered off or power supply is abnormal.
Flashing: Power supply is abnormal.
SYS
Flashing: The switch works properly.
On or Off: The switch works improperly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-SG3428X and is the answer not in the manual?

TP-Link TL-SG3428X Specifications

General IconGeneral
Switch typeManaged
Switch layerL2+/L3
Quality of Service (QoS) supportYes
Stackable-
Form factor1U
Product colorBlack
Number of fans0 fan(s)
Console portRJ-45/micro-USB
Power connectorAC-in jack
SFP+ module slots quantity4
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
IPv4 routes48
Number of VLANs4000
Networking standardsIEEE 802.3ab, IEEE 802.3ae, IEEE 802.3i, IEEE 802.3u, IEEE 802.3z
Virtual LAN featuresPrivate VLAN, Protocol-based VLAN, Tagged VLAN, Voice VLAN
Ethernet LAN data rates10, 100, 1000 Mbit/s
DHCP featuresDHCP client, DHCP relay, DHCP server, DHCP snooping, DHCPv6 client, DHCPv6 snooping
AuthenticationGuest VLAN, MAC-based authentication, Port-based authentication
Authentication typeAAA, RADIUS, TACACS+
Jumbo frames9000
Forwarding rate95.23 Mpps
MAC address table16000 entries
Packet buffer memory12 MB
Heat dissipation80.353 BTU/h
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Package depth250 mm
Package width528 mm
Package height80 mm
Package weight2690 g
Cables includedLAN (RJ-45)
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (max)23.6 W
Harmonized System (HS) code85176990
IPv4 & IPv6 featuresIPv4/IPv6 access-control list (ACL), IPv6 Telnet, IPv6 ping, IPv6 tracert
Weight and Dimensions IconWeight and Dimensions
Depth180 mm
Width440 mm
Height44 mm

Related product manuals