Start Multicast IP: Displays start multicast IP of the IP-range.
End Multicast IP: Displays end multicast IP of the IP-range.
8.3.2 Port Filter
On this page you can configure the multicast filter rules for port. Take the configuration on this
page and the configuration on IP-Range page together to function to implement multicast filter
function on the switch.
Choose the menu Multicast→Multicast Filter→Port Filter to load the following page.
Figure 8-11 Port Filter
The following entries are displayed on this screen:
¾ Port Filter Config
Port Select: Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select: Select the desired port for multicast filtering. It is multi-optional.
Port: Displays the port number.
Filter: Select Enable/Disable multicast filtering feature on the port.
Action Mode: Select the action mode to process multicast packets when the
multicast IP is in the filtering IP-range.
z Permit: Only the multicast packets whose multicast IP is in the
IP-range will be processed.
z Deny: Only the multicast packets whose multicast IP is not in
the IP-range will be processed.
Bound IP-Range (ID): Enter the IP-rang ID the port will be bound to.
107
To Next Page
Loading...
