Detail：
Click the Detail button to view the complete information collected
for the port.
13.1.3 NDP Config
On this page you can configure the NDP function for the switch.
Choose the menu Cluster→NDP→NDP Config to load the following page.
Figure 13-4 NDP Config
The following entries are displayed on this screen:
¾ Global Config
NDP: Select Enable/Disable NDP function globally.
Aging Time: Enter the period for the neighbor switch to keep the NDP packets
from this switch.
Hello Time: Enter the interval to send NDP packets.
¾ Port Config
Select: Select the desired port to configure its NDP status.
Port: Displays the port number of the switch.
188
To Next Page
Loading...
