Chapter Introduction
Chapter 14 Maintenance This module is used to assemble the commonly used system tools
to manage the switch. Here mainly introduces:
z System Monitor: Monitor the memory and CPU of the switch.
z Log: View configuration parameters on the switch.
z Cable Test: Test the connection status of the cable connected to
the switch.
z Loopback: Test if the port of the switch and the connected device
are available.
z Network Diagnose: Test if the destination is reachable and the
account of router hops from the switch to the destination.
Chapter 15 System
Maintenance via FTP
Introduces how to download firmware of the switch via FTP
function.
Appendix A Specifications Lists the hardware specifications of the Switch
Appendix B Configure the PCs Introduces how to configure the PCs.
Appendix C 802.1X Client
Software
Introduces how to use 802.1X Client Software provided for
authentication.
Appendix D Glossary Lists the glossary used in this manual.
Return to CONTENTS
5
To Next Page
Loading...
