Figure 5-3 Mirroring Port
The following entries are displayed on this screen.
¾ Mirror Group
Number: Select the mirror group number you want to configure.
¾ Mirroring Port
Mirroring Port: Select the mirroring port number.
¾ Mirrored Port
Port Select: Click the Select button to quick-select the corresponding port based
on the port number you entered.
Select: Select the desired port as a mirrored port. It is multi-optional.
Port: Displays the port number.
Ingress: Select Enable/Disable the Ingress feature. When the Ingress is
enabled, the incoming packets received by the mirrored port will be
copied to the mirroring port.
Egress: Select Enable/Disable the Egress feature. When the Egress is
33
To Next Page
Loading...
