TP-Link TL-WA5110G Quick Installation Guide

1
Note
Note
Please use only wired network connections to configure the AP.
The power adapter can be directly connected to the AP too. In this way
you can connect your computer directly to the AP with an Ethernet cable.
Turn off all your network devices,
including your computer(s), powe
r
injector and the AP.
Connect your computer to the
LAN port on the power injecto
r
with an Ethernet cable.
Plug the provided power adapte
r
into the DC jack on the powe
r
injector, and the other end to a
standard electrical wall socket.
Connect your AP to the PoE port
on the power injector with an
Ethernet cable.

TP-Link TL-WA5110G Specifications

General

2.4 GHz	Yes
Modulation	BPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Frequency band	2.4 - 2.4835 GHz
Cabling technology	10/100Base-T(X)
Receiver sensitivity	54M: -74dBm 48M: -76dBm 36M: -81dBm 12M: -89dBm 11M:-90dBm 9M:-91dBm 5.5M:-92dBm 1M:-94dBm
Maximum data transfer rate	54 Mbit/s
Frequency range	2400 - 2483.5 MHz
Maximum operating distance	50000 m
Compliance industry standards	IEEE 802.11b, IEEE 802.11g
Non-operating relative humidity (non-condensing)	5 - 95 %
Antenna gain level (max)	4 dBi
Internal	No
Certification	CE FCC
Supported network protocols	PPPoE, IP
Ethernet LAN (RJ-45) ports	1
Output power description	12 V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Dimensions (WxDxH)	165 x 108 x 28 mm