Need help?Do you have a question about the TP-Link TL-WA5210G and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| Modulation | DBPSK, DSSS, OFDM, QPSK |
| Frequency band | 2.4 - 2.4835 GHz |
| Receiver sensitivity | 802.11g 54M: -76dBm 48M: -78dBm 36M: -82dBm 12M: -91dBm 9M:-92dBm, 802.11b 11M:-90dBm 5.5M:-92dBm 1M:-98dBm |
| Maximum data transfer rate | 54 Mbit/s |
| Networking features | Fast Ethernet |
| Vertical beam width | 60 ° |
| Transmit power range | 20/27 dBm dBmW |
| Horizontal beam width | 30 ° |
| Maximum operating distance | 50000 m |
| Compliance industry standards | IEEE 802.11g, IEEE 802.11b |
| Supported data transfer rates | 54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps |
| Antenna connector type | RP-SMA |
| Antenna gain level (max) | 12 dBi |
| Internal | No |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA, WPA-AES, WPA-PSK, WPA2, WPA2-PSK |
| Power requirements | 12VDC / 1.0A |
| Operating temperature (T-T) | -30 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Dimensions (WxDxH) | 265 x 120 x 83 mm |
|---|
Details the key capabilities and standards supported by the wireless device.
Explains symbols and formatting used in the manual for clarity.
Describes the function of each LED on the device for status indication.
Outlines physical ports, system prerequisites, and environmental factors for setup.
Guides users through initial PC and AP IP address configuration.
Provides a step-by-step walkthrough for basic network and wireless setup.
Covers accessing the web interface and viewing device status.
Explains setup procedures and device operational modes.
Details configuration for LAN and WAN parameters.
Covers advanced wireless settings like mode, security, and MAC filtering.
Details settings for the Dynamic Host Configuration Protocol server.
Explains firewall, IP, domain, and MAC filtering for network protection.
Describes functions for firmware, backup, reboot, and other system management.
Covers accessing the web interface and viewing device status in AP mode.
Explains setup procedures and device operational modes for AP mode.
Details configuration for LAN and WAN parameters in AP mode.
Covers advanced wireless settings like mode, security, and MAC filtering in AP mode.
Details settings for the Dynamic Host Configuration Protocol server in AP mode.
Describes functions for firmware, backup, reboot, and other system management in AP mode.
To Next Page
