Need help?Do you have a question about the TP-Link TL-WA3001 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| Frequency band | 2.4 - 5 GHz |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Maximum data transfer rate | 2402 Mbit/s |
| Maximum data transfer rate (2.4 GHz) | 574 Mbit/s |
| Security algorithms | SNMP, WPA, WPA-Enterprise, WPA2, WPA2-Enterprise, WPA3 |
| Service Set Identifier (SSID) features | Multiple SSIDs |
| Supported protocols | IPv4, IPv6 |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Input current | 0.375 A |
| DC voltage range | 48 V |
| Power over Ethernet (PoE) type supported | Passive PoE |
| Placement | Table |
| Product color | Black |
| Antenna type | External |
| Antennas quantity | 4 |
| Cables included | LAN (RJ-45) |
| Number of products included | 1 pc(s) |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Sustainability certificates | Federal Communications Commission (FCC), RoHS |
Weight and Dimensions| Depth | 165 mm |
|---|---|
| Width | 240 mm |
| Height | 43.6 mm |
Guides users through the process of connecting and configuring the access point for internet access.
Guides on configuring wireless network name (SSID), password, and security options.
Explains how to use Wi-Fi Protected Setup (WPS) for an easier, security-protected wireless connection.
Guides on checking and configuring advanced wireless settings for optimal network performance.
Instructions for setting a static IP address for the access point to avoid network conflicts.
Provides methods for updating the access point's firmware via auto update, online, or local file.
Allows backing up current settings to a file and restoring them later, or resetting to factory defaults.
Guides on changing the web management page login password for enhanced security.
To Next Page
