56
Chapter 8 Manage Your Access Point
• To test the connectivity via Traceroute:
1 ) Choose Traceroute as the diagnostic tool.
2 ) Enter the IP Address or Domain Name of the tested host.
3 ) Keep the default Traceroute Max TTL.
4 ) Click START to begin the diagnostics. The diagnostics result will be displayed.
8. 12. System Log
When the access point does not work normally, you can save the system log and send
it to the technical support for troubleshooting.
• To save the system log locally:
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System > System Log.
To Next Page
Loading...
