25
Chapter 4
Wireless Settings
7. Click SAVE .
4. 1. 4. Multi-SSID Mode
When the device works in Multi-SSID mode, you can customize and isolate multiple
wireless networks.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Wireless > Wireless Settings.
• To enable or disable OFDMA:
OFDMA enables multiple users to transmit data simultaneously, and thus greatly
improves speed and efficiency. Noted that only when your clients also support OFDMA,
can you fully enjoy the benefits. It is disabled by default.
1. Go to Wireless > Wireless Settings.
2. Enable OFDMA.
• To enable or disable TWT:
To Next Page
Loading...
