46
Chapter 8 Manage Your Access Point
2 ) Specify the LED Off Time as needed, and the LEDs will be off during the period.
4. Click SAVE .
8. 3. Configure the SNMP Agent
SNMP (Simple Network Management Protocol) is a popular network monitoring and
management protocol. You can configure the SNMP agent to communicate with your
network monitoring tool or network management system.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System > SNMP.
3. Enable SNMP Agent.
To Next Page
Loading...
