Tip: For more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location
Assistant.
Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The password of your extended network is the
same as your host router.
Tip: You can also set up the extender in Access Point mode to transform your existing wired network to a wireless
one. For details, refer to the user guide at https://www.tp-link.com/support/download
Manage the Extender
After setup, you can manage the extender via any of the methods below.
Note: If your extender and router use the same network name, Method 1 is recommended.
Method 1: Via the Tether App
1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. Manage the extender as needed.
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the
Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
3. Manage the extender as needed.
OneMeshTM with Seamless Roaming
TP-Link OneMesh router and extenders work together to form one unified Wi-Fi
network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh’s
seamless coverage.
Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name, password, access control settings
and more.
To Next Page
Loading...
