E
- 1 -
Connect to the Access Point with the Ethernet cable or via wireless. The
default wireless network name (SSID) of the Access Point is
TP-LINK_AP_XXXXXX. Please check the label at the bottom of the unit for
more details.
Plug the provided power adapter into the power jack on the back of the
Access Point, and the other end to a standard electrical wall socket. Then
press the ON/OFF button to power on the device.
Note
1. The product model shown in this QIG for Wireless Access Point
is"TL-WA901ND", as an example.
2. Information for technical support can be found in the last page.
Installation
Connecting the Device for Configuration
To Next Page
Loading...
