TL-WPA281/TL-WPA271 Wireless N Powerline Extender
14
The WPS Configuration Screen of Wireless Adapter
Method Three:
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 3-5, then
the following screen will appear.
Figure 3-6 Add a New Device
Step 2: Choose Press the button of the new device in two minutes and click Connect.
Step 3: For the configuration of the wireless adapter, please choose Push the button on my access
point in the configuration utility of the WPS as below, and click Next. (QSS, also called WPS,
is used by our company on the wireless adapter.)
To Next Page
Loading...
