19. Change the router IP address (optional but recommended). This will minimize issues related to
IP address conflicts.
a. Login using the new router administration Username and Password defined in the
previous step.
b. Click on “Network” in the left-hand menu, then “LAN”. Change the IP Address to
192.168.234.1, or to the IP address you prefer for your site. Next, press the “Save”
button.
A pop-up will display “Modification of LAN IP Address or Subnet Mask will take effect after
rebooting, click OK to reboot the device now.” Go ahead and click the OK button. A progress bar
will display as the router reboots.
Accessing the Router after Configuration
After completing this configuration, to access the router’s Log In page, you will first need to connect to
its WIFi network (e.g. “TA”), then type the IP address you defined in step 19 in a browser window (e.g.
192.168.234.1).
To Next Page
Loading...
