TP-Link VX230v Install Guide
InfiNET Broadband Pty Ltd
Level 15, Corporate Centre One, 2 Corporate Court, Bundall, QLD, 4217 – Ph: 1300 101 414
6. Adding a TP-Link HX220 (Wireless)
The TP-Link VX230 allows you to add additional HX220 devices to create a Wi-Fi mesh network to increase
the coverage of your Wi-Fi network and remove dead-zones.
To do this, login to the TP-Link VX230 modem as shown in Section 4 of this document. Under the Network
Map tab, click on Add Mesh Device button
Make sure that you have the TP-Link HX220 unit powered on and sitting close to the main TP-Link VX230
(within 1m) with the LED flashing blue.
To Next Page
Loading...
