TP-Link VX230v Install Guide
InfiNET Broadband Pty Ltd
Level 15, Corporate Centre One, 2 Corporate Court, Bundall, QLD, 4217 – Ph: 1300 101 414
4. Accessing the administration portal
Once you’ve successfully connected to the VX230 via a Wi-Fi or Ethernet cable, you will be able to access the
device using either of these URLs via a web-browser;
• http://tplinkmodem.net
• http://192.168.1.1
The first page you will reach is a page to set the password to your router. The VX230 access credentials will
be one of two options:
• Router when Preconfigured – Password is set and provided by InfiNET
• Router when Factory Reset – The password will need to be reset. Contact InfiNET to obtain original
password
Once you have set the password, you will need to enter it on the login page
To Next Page
Loading...
