TP Toys Active Fun Explorer2 User Manual

Important! These instructions must be followed for safe assembly and use. Please retain for future reference.
Important! Vous devez suivre ces instructions pour que le montage et l’utilisation se fassent en toute sécurité.
Veuillez conserver pour référence ultérieure.
Importante! Per garantire sicurezza di montaggio ed uso, seguire queste istruzioni e conservarle per futuro riferimento.
Importante! Debe seguirse estas instrucciones para un armado y uso seguros. Sírvase conservarlas para consultarlas en el futuro.
Wichtig! Diese Anweisung ist für sicheren Aufbau und Gebrauch zu befolgen. Für künftigen Gebrauch aufbewahren.
Importante! Para assegurar uma montagem e uma utilização seguras, têm de ser seguidas estas instruções. Guardar para referência futura.
TOY MUST BE ASSEMBLED BY AN ADULT BEFORE USE.
THIS PRODUCT CONTAINS SMALL PARTS AND IS NOT SUITABLE FOR CHILDREN UNDER
36 MONTHS UNTIL FULLY ASSEMBLED.
CHILDREN MUST NOT USE THE EQUIPMENT UNTIL PROPERLY INSTALLED.
REMOVE ALL PACKAGING BEFORE GIVING TO YOUR CHILDREN.
WARNING: ONLY FOR DOMESTIC USE. FOR OUTDOOR USE.
ANCHORS THAT ARE SUPPLIED WITH THIS PRODUCT MUST BE FITTED BEFORE USE.
ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT IS INTENDED FOR USE BY CHILDREN FROM AGES 18 MTHS TO
12 YEARS.
WARNING: MAXIMUM COMBINED USER WEIGHT 100KGS
WARNINGS!
INSTRUCTIONS FOR ASSEMBLY MAINTENANCE AND USE
PLEASE RETAIN FOR FUTURE REFERENCE.
TP843
Explorer2 Climbing Set
with Platform & Den
2 Person
Assembly
Build
TP843 Explorer Frame Set Inst 5012 -B 10 15.qxp_TP843 Explorer Frame Set Inst 5012-B 10 15 19/10/2015 11:37 Page 1

TP Toys Active Fun Explorer2 Specifications

General

Material	Plastic
Maximum User Weight	50kg
Recommended Age	3-12 years
Age Suitability	3 years+
Included Components	climbing wall

Summary

TP843 Explorer2 Climbing Set: Overview and Safety

Initial Safety Precautions

Important safety warnings and assembly prerequisites for safe operation.

General Product Usage and Maintenance Guidelines

Assembly and Safety Information

Crucial assembly advice, handling small parts, and safety precautions for initial setup.

Siting and Placement Recommendations

Guidelines for choosing a safe and level location for the climbing set.

Usage and Supervision Requirements

Instructions on age-appropriate use, adult supervision, and safe play practices.

Operational and Disposal Guidelines

Advice on weather use, maintenance, fire risks, and safe disposal procedures.

Assembly Preparation and Component Sorting

Pre-Assembly Instructions

Emphasizes the importance of reading instructions before commencing assembly.

Sorting Fixings and Parts

Visual guide to sorting fixings and parts prior to assembly for efficiency.

Product Components and Required Tools

Component Identification

Identifies all structural components and accessories included in the package.

Fastener Inventory

Details all screws, washers, and nuts required for assembly.

Tools for Assembly

Specifies the necessary tools for building the climbing set.

Step 1: Base Frame Assembly

Connecting Base Poles (MT0332)

Detailed instructions for assembling the primary support poles of the climbing frame.

Securing with Fasteners

Guidance on using specific washers, bolts, and spring washers for secure connections.

Step 3: Upper Structure Assembly (Full Height)

Attaching Vertical Supports (MT0350)

Instructions for connecting the main vertical poles to the frame structure.

Securing with Bolts and Washers

Details on using specific fasteners to ensure the stability of the upper structure.

Steps 4 & 5: Adding Horizontal Supports

Step 4: Attaching Short Horizontal Bars (MT0337)

Guide for attaching shorter horizontal frame pieces using specified hardware.

Step 5: Attaching Medium Horizontal Bars (MT0335)

Instructions for connecting medium-length horizontal frame elements.

Step 6: Platform Installation

Attaching Platform Poles (MT0336)

Instructions for connecting the platform support poles to the main structure.

Securing Platform from Top and Bottom

Details on how to fix the platform securely using designated holes.

Step 7: Height Configuration and Final Fixings

Low Height Assembly Completion

Guidance for completing the lower configuration of the climbing set.

Full Height Assembly Continuation

Instructions to proceed to the next stage for the full height configuration.

Applying Final Securing Hardware

Details on using specific bolts, washers, and stakes for the chosen height configuration.

Step 8: Final Tightening Check

Step 9: Full Height Assembly - Lower Supports

Attaching Lower Vertical Supports (MT0347)

Instructions for connecting the lower set of vertical poles for full height.

Securing with Fasteners (A1, A2, B1, B2)

Details on using specific hardware to attach the lower supports securely.

Step 10: Base Reinforcement Attachment

Connecting Base Reinforcement Poles (MT0333)

Guide for attaching the lower horizontal reinforcement bars to the frame.

Securing with Top and Bottom Holes

Instructions on how to use specific holes for securely fastening the reinforcement bars.

Steps 11 & 12: Final Frame Fixings and Ground Anchoring

Step 11: Attaching Upper Frame Bars (MT0334)

Instructions for adding the final upper horizontal bars to the climbing frame.

Step 12: Securing with Stakes (WF5280)

Guidance on using stakes to anchor the climbing set securely to the ground.

Step 13: Attaching the Explorer Den

Step 14: Securing the Explorer Den Cover

Step 15: Final Den Cover Adjustments

Safe Play Area and Positioning Guidelines

Product Registration and Warranty Information