T+A MP 3100 HV User Manual

17
Source names
menu item
At this menu item you can activate and disable external sources, and assign a
plain text name to each source; this name then appears in the screen displays.
When you call up this menu item using the  button, a list of all the
external sources of the MP 3100 HV appears. Each source is followed by the
assigned name, or if you have disabled the source concerned the note
'disabled'.
If you want to activate / disable a source, or change the plain text name,
navigate to the appropriate line.
To activate a source, press the green  button; pressing the red 
button disables the source.
To change the plain-text name, move to the appropriate line and press the
 button. Now use the alpha-numeric keypad of the FD100 to change the
name as required, then confirm your choice with ; this saves the
settings for that source.
The  button is used to switch between numeric and alpha-numeric input,
and between capitals and lower-case letters.
Letters can be erased by pressing the  button.

If you should wish to restore the factory default source name, erase the whole
name before saving the empty field with the  button: this action resets the
display to the standard source names.


The only available method of entering the name is to use the alpha-
numeric keypad on the remote control handset.
Display Brightness
menu item
(screen brightness)

At this point you can adjust the brightness of the integral screen to suit your
personal preference for normal use.


We recommend that brightness settings 6 and 7 should only be used when the
screen is difficult to read due to very bright ambient light.
A lower brightness setting will extend the useful life of the screen.
Display Mode
menu item

This menu item offers the choice between three different display operation
modes:
 Always on
 Temporary
 Always off
Selecting 'Temporary' will switch the display is on for a short while each time
the MP 3100 HV is being operated. Shortly after operation the display will be
switched off again automatically.

The brightness of the display can be adjusted separately with the menu item
'Display Brightness' (see above).
Language
menu item

In this menu item you define the language to be used for the displays on the
screen of the front panel of the MP 3100 HV.
The language used for data transferred to the machine, e.g. from an Internet
radio station, is determined by the supplying device or the radio station; you
cannot define the language on the MP 3100 HV.
Device name
menu item
This menu point can be used to assign an individual name to the MP 3100 HV.
In a home network the device then appears under this name.
If an amplifier is connected via the HLink connection, then the amplifier is able
to accept this name automatically, and display it on the screen.

The amplifier only accepts this name if an individual name has not already
been assigned at the amplifier itself.

T+A MP 3100 HV Specifications

General

Brand	T+A
Model	MP 3100 HV
Category	Media Player
Language	English