T+A MP 3100 HV User Manual

36
Operating the DISC player
Selecting the disc player as
source
First choose DISC as listening source by opening the source selection menu on
the FD100 remote by pressing the -button or by turning the SOURCE-
Knob on the front panel of the MP 3100 HV.
Inserting a CD
 Open the CD drawer ( on the front panel /  FD100)
 Place the disc centrally in the appropriate depression in the drawer, with the
side to be played facing down.
 Close the CD drawer (on the front panel /  FD100)
When you close the drawer, the machine immediately reads the CD’s 'Table of
Contents'; the screen displays the message 'Reading'. During this period all
button-presses are ignored.
The screen then displays the total number of tracks on the CD in the drawer,
e.g.: '13 Tracks 60:27'.
 It is also shows the current mode of operation, e.g.
Front panel display

In disc mode the MP 3100 HV can be switched to either of two different screen
displays with a long press on the  button:
 Large-format display:
Enlarged display of the most important information, clearly legible even from
a distance
 Detail display:
Small-text display showing a large number of additional information points,
e.g. bit-rate etc.

Fig.
Large format display

Fig.
Detail display

T+A MP 3100 HV Specifications

General

Brand	T+A
Model	MP 3100 HV
Category	Media Player
Language	English